Instruction Manual for Libra Care Bed
Page 8
2 General information
The Libra care bed is simply referred to as the 'bed' or 'care bed' in this
instruction manual. In addition to the standard functions of the bed, this
instruction manual also describes optional functions and special bed
equipment which might not apply for the model that you have selected.
• This care bed fulfils all the requirements of the Medical Device Regulation (EU)
2017/745 (MDR). It is classified as a Class I active medical device in accordance
with § 13 of the German Medical Devices Act (Medizinproduktegesetz: MPG).
• Please observe your obligations as the operator in accordance with the Medical
Devices Operator Ordinance (Medizinprodukte-Betreiberverordnung, German
abbreviation: MPBetreibV), to ensure that this medical product is always operated
safely and with no risk to residents, users or third parties.
• This instruction manual contains safety information which must be followed. All
users working on and with the care bed must be familiar with the contents of this
instruction manual and follow the safety advice provided.
Instructions for the operator:
Any item of technical equipment, electrical or otherwise, can prove hazardous if not
used properly.
• You are obligated to instruct users in the proper use of this care bed in
accordance with § 5 of the German Medical Devices Operator Ordinance
(MPBetreibV § 5).
• Ensure that users know where this instruction manual is kept, in accordance with
§ 9 of the German Medical Devices Operator Ordinance (MPBetreibV § 9).
Before putting the bed into service for the first time:
• Remove all transport securing devices and packaging film.
• Clean and disinfect the bed before using it for the first time.
To Next Page
Loading...