• Do not use scouring agents, stainless steel care products, abrasive
cleaning products or scouring pads.
These products can damage the surface.
• Cleaning and decontaminating agents must be used in the specified
concentrations.
• We recommend cleaning the bed by wiping it with a (damp) cloth.
When selecting cleaning agents, ensure that the agents chosen are
mild (gentle to skin and surfaces) and environmentally friendly. A
standard household cleaner can generally be used.
• Ensure that no liquid residues remain on any parts of the bed after
cleaning or disinfection. Otherwise the surfaces in these areas may
become damaged in the long term.
• If, despite its excellent mechanical resistance, the coated surface is
damaged by scratches or marks which permeate the entire coating,
the affected areas should be resealed using a suitable repair
substance to prevent moisture from penetrating. For further
information, consult STIEGELMEYER or a specialist dealer of your
choice.
• Disinfectants based on compounds that could potentially release
chlorine may be corrosive for metals, synthetics, rubbers and other
materials over longer contact periods or when concentrations are too
high. Use these agents sparingly and only if expressly required.
• For disinfection by wiping, most cleaning and disinfection agents usually used
in hospitals or care facilities can be used, such as cold and hot water,
detergents, alkaline solutions and alcohols.
• These agents must not contain any substances that could change the surface
structure or the adhesive properties of the plastic materials.
• The choice of cleaning agents and disinfectants available on the market may
change from time to time. Stiegelmeyer therefore routinely tests the most
commonly used materials for compatibility. The most up-to-date list of tested
cleaning agents and disinfectants can be obtained on request.
To Next Page
Loading...