Instruction Manual for Libra Care Bed
Page 14
2.3 PRODUCT DESCRIPTION
2.3.1 Intended use
• This bed is designed for positioning and transporting residents, as an aid to
diagnosing, monitoring, treating, and alleviating illnesses or compensating for
injuries or disabilities. For detailed instructions for use, see chapter 9.7
• This bed is suitable only for accommodating adult residents whose height is at
least 146 cm.
• The bed itself is not life sustaining or life supporting.
• The bed has no medical indication.
2.3.2 Use for the intended purpose
- The bed is intended for indoor use in senior residences and nursing homes and
comparable medical institutions with qualified personnel. For detailed instructions
for use, see chapter 9.5.
- Qualified personnel must be skilled in handling the beds and be thoroughly
conversant with the instruction manual.
- This bed may be operated without restrictions with a permanent maximum
load of 225 kg (resident and accessories). Symbol:
- The permitted weight of the resident depends on the total weight of the
accessories attached (e.g. respirators, infusions,) Symbol:
Example:
- If the owner of the bed changes, the instruction manual must be handed over with
the bed.
- The bed with its castors is designed for being moved within the room, with the
resident in the bed.
- This bed is suitable for repeated use.
- This bed must only be used as a single bed.
- This bed may not be used in explosive environments caused, for example, by
cleaning agents or anaesthetics.
- This bed must not be used in combination with high-frequency surgical equipment.
- Before using the safety sides, assess and take into consideration the clinical
condition and particular physical build of the patient. Observe the special safety
information in chapter 4.5
To Next Page
Loading...