Instruction Manual for Libra Care Bed
Page 26
• The motor is now disconnected from the
backrest
• Put the motor down on the bed frame.
• After the second person has left the
danger zone, the first person (with the
help of the second person) lowers the
backrest carefully.
Hold the backrest firmly when lowering it, as it could otherwise fall
unchecked!
• Now the motor on the lifting bar is no longer connected to the motor connector
mount.
• The lifting bar remains in the CPR release position.
Restoring the bed to its original state following CPR release of the backrest
• Raise the backrest by hand.
• Swing the lifting bar up again, use the bolt to secure it in place in the motor
connector mount and fold the curved clip back over.
To Next Page
Loading...