Fix the centre support in place
• Pull the centre support out of the
holder 3 at the foot end of the
bed.
• Open the cover 2 by hand and hold it
firmly.
Make sure that fingers, bed linen, tubes or other objects cannot become
trapped between the mobilisation support and the support holder opening!
• Slot the centre support 5 into the support
socket as illustrated (with the release
button 6 facing away from the bed)
• Push the centre support straight in as far
as it will go. You will hear it click into place.
• Then check to ensure that it is locked in
place by trying to pull it upwards. It should
not be possible to disengage the
mobilisation support.
To Next Page
Loading...