HLE 71, HLE 71K
English
41
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The specified
intervals must be shortened accordingly when working for longer than normal or under
difficult cutting conditions (extensive dust, etc.).
before starting work
at the end of work and/or
daily
weekly
monthly
yearly
if faulty
if damaged
as required
Complete machine
Visual inspection X
clean X
Intake port for cooling air
Visual inspection X
clean X
Cutting blades
Visual inspection X
clean
2)
X
sharpen
1)2)
X
have them replaced by a specialist dealer
1)
X
Gear lubrication
check X
Top up X
Carbon brushes
inspection by a specialist dealer after every
100 hours of operation
1)
have them replaced by a specialist dealer
1)
X
All accessible screws, nuts and bolts retighten X
Safety information labels replace X
1)
STIHL recommends STIHL servicing dealers
2)
Afterwards spray the blades with STIHL resin solvent