Still RCD25 User Manual

Scheduled truck maintenance
Maintenance — 500 hours
At operating hours
500 1500 2500 3500 4500
5500 6500 7500 8500 9500
Carried
out

Chassis, bodywork and fittings
Check the chassis for cracks
Check the overhead guard/cab and panes of glass for damage
Check the controls, switches and joints for damage, and apply grease and oil
Check the driver’s seat for correct function and for damage
Check that the seat belt is in good condition and functions correctly
Tyres and wheels
Check that the wheels are securely attached and check the tightening torques of the
wheel nuts
Check the tyres for wear and check the air pressure if necessary
Check the wheels for damage
Internal combustion engine
Change the engine oil and filter
Check the cooling system for leaks and correct function
Check the coolant and top up if necessary
Replace the air filter insert
Fuel system
Change the fuel filter
Check the fuel lines and clips
Steering and steering axle
Lubricate the rear wheel bearings
Lubricate the steering axle and check for leaks
Brake
Check the oil level of the brake system
Hydraulics
Check hydraulic system for condition, correct function and leaks
Lift mast
Check load chains for damage and wear, adjust and lubricate
Check mast bearings for damage, and lubricate. Check the tightening torque
Maintenance
5
Scheduled truck maintenance
10560068011601 EN - 09/2020

Still RCD25 Specifications

General

Brand	Still
Model	RCD25
Category	Trucks
Language	English