– Lightly spread engine oil over the rubber
packing (2) of the new oil filter (1).
– Temporarily assemble the new oil filter by
rotating it by hand.
– Assemble the oil filter with the filter wrench
at a torque of 16 ~ 20 N·m.
NOTE
Please refer to the engine spare parts manual
to find the part number of usable engine oil fil-
ters.
– Fill the engine with engine oil according to
the detailed instructions in "Filling up with
engine oil".
Replacement of Coolant
General genuine coolant: 1 year or 1,200
hours.
Genuine LCC coolant: 3 years or 6,000 hours.
DANGER
– Never open the radiator cap while the engine is
overheated. If the radiator cap is opened while the
engine is overheated, hot water will spurt out and
may cause serious burns. Open the radiator cap
after ensuring that the engine has been cooled
sufficiently.
– Mark and separately manage the containers for
storing coolant from beverage containers to avoid
confusion. If coolant is ingested, see a doctor im-
mediately.
CAUTION
Be careful not to get coolant on any belts or electric
apparatus when replacing the coolant.
– Make sure that engine and radiator are
cooled.
Maintenance
5
Maintenance service
12160068011601 EN - 09/2020
To Next Page
Loading...
Need help?
General
