Maintenance - 3000 hours
At operating hours
3000
6000
9000
12000
15000
Carried
out
Chassis, bodywork and fittings
Check chassis for cracks
Check overhead guard/cab and panes of glass for damage
Check controls, switches and joints for damage, and apply grease and oil
Check driver's seat for correct function and for damage
Variant: Check the dual pedal for damage and correct function, and lubricate
Check that the seat belt is in good condition and functions correctly
Check the signal horn
Tyres and wheels
Check that the wheels are securely attached and check the tightening torques of the
wheel nuts
Check tyres for wear and check the air pressure if necessary
Check wheels for damage
Torque converter
Change the gearbox oil for the torque converter
Replace the gearbox oil filter for converter gear
Drive axle
Drive axle: Check mounting, check for leaks, and clean cooling fins
Change the axle oil
Internal combustion engine
Change the engine oil and the engine oil filter
Check the condition of the internal combustion engine (visual inspection)
Check the exhaust system for leaks
Adjust the valve clearance/rocker lever
Check the cooling system for leaks and correct function
Check the coolant and top up if necessary
Change the coolant
Replace the V-belt
Replace the air filter element
Fuel system
Maintenance
5
Scheduled truck maintenance
110 60068011601 EN - 09/2020
To Next Page
Loading...
Need help?
General
