Still RCD25 User Manual

At operating hours
3000 6000 9000 12000 15000
Carried
out

Change the fuel filter
Check the fuel lines and clips
Steering and steering axle
Lubricate the rear wheel bearings
Lubricate the steering axle and check for leaks
Brake
Check and adjust the service brake
Check and adjust parking brake
Check the oil level of the brake system
Change the brake oil
Electrical system
Check the fuses
Check lighting and indicator lights
Check all power cable connections
Hydraulics
Check hydraulic system for condition, correct function and leaks
Replace the filter cartridge for the hydraulic oil
Check that the hydraulics blocking function (Isolation valve) is working correctly
Lift mast
Check load chains for damage and wear, adjust and lubricate
Check mast bearings for damage, and lubricate. Check the tightening torque
Check mast profiles for damage and wear, and lubricate
Check lift cylinders and connections for damage and leaks
Check guide pulleys for damage and wear
Check support rollers and chain rollers for damage and wear
Check the play between the fork carriage stop and run-out barrier
Check tilt cylinders and connections for damage and leaks
Check fork carriage for damage and wear
Check fork arm interlock for damage and that it is working correctly
Check that there is a safety screw on the fork carriage or on the attachment
Check fork arms for wear and deformation
Maintenance
5
Scheduled truck maintenance
11160068011601 EN - 09/2020

Still RCD25 Specifications

General

Brand	Still
Model	RCD25
Category	Trucks
Language	English