Driving on lifts
The driver may only use this truck on lifts with
a sufficient rated capacity and for which the
operating company has been granted authori-
sation.
DANGER
There is a risk to life if you are crushed or run over
by the truck.
– There must be no personnel already in the lift
when the truck is driven into the lift.
– Personnel are only permitted to enter the lift once
the truck is secure, and must exit the lift before
the truck is driven out.
Determining the actual total weight
– Park the truck securely.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the at-
tachment (variant) nameplate and, if neces-
sary, by weighing the load to be lifted.
– Add the determined unit weights to obtain
the actual total weight of the truck:
Tare weight (1)
+ Ballast weight (variant) (2)
+ Attachment net weight (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for driver
= Actual total weight
– Drive the truck with the forks forwards into
the lift without touching the shaft walls.
– Park the truck securely in the lift to prevent
uncontrolled movements of the load or the
truck.
5060_003-071
Use and operation
4
Handling loads
8560068011601 EN - 09/2020
To Next Page
Loading...
Need help?
General
