Still RCD25 User Manual

Direction selection lever
Direction selection lever (1) is used to select
the required drive direction of the truck or to
switch the drive mode to idling. The direction
selection lever offers three different positions:
●
FORWARDS — direction selection lever
pushed forwards into position "A"
●
NEUTRAL — direction selection lever in
centre position between "FORWARDS" and
"REVERSE"
●
REVERSE — direction selection lever
pulled backwards into position "B"
Adjusting the steering column
DANGER
Only adjust the steering column when the truck is
stationary.
Angle adjustment
– Pull down the handle(1) clockwise.
– Move the steering column into the required
position.
– Pull back the handle anti-clockwise to its
original position.
Start the engine
– Sit in the driver's seat and fasten the seat
belt. Ensure that the cab doors or the driver
restraint system installed on the truck is
closed.
– Ensure that the direction selection lever (if
present) is in the central position (neutral).


Use and operation
4
Adjusting the steering column
62 60068011601 EN - 09/2020

Still RCD25 Specifications

General

Brand	Still
Model	RCD25
Category	Trucks
Language	English