Remaining ready for operation
Pre-shift checks
Carrying out the following checks as part of
your daily routine will help to keep the forklift
truck in good condition. These checks are
supplemental and do not replace periodic
maintenance work.
NOTE
If, when carrying out the daily checks, you dis-
cover a defect or you are unsure whether the
truck will function properly, do not use the
truck and contact the technical service depart-
ment.
Daily checks before use
The following checks must be performed on a
daily basis in order to keep your truck in good
condition and to operate safely. These checks
supplement and do not replace the scheduled
maintenance operations.
●
Check the correct position and fastening, in-
tactness and operation of the various safety
components installed on the truck.
●
Make sure that "seat switch" is working cor-
rectly.
●
Check that the brakes work correctly,
checking their travel and efficiency.
●
Check the tyre pressure and wear condi-
tions.
●
Visually inspect wheels for correct tight-
ness.
●
Make sure that the lights work correctly (if
applicable).
●
Visually check that the chains are taut.
●
Make sure that the start/stop key works cor-
rectly.
●
Check that the fork arms are in good condi-
tion;
●
Check that the fork arm control levers work
correctly
●
Check the fuel filter water trap
●
Check engine coolant level.
●
Check brake oil level.
●
Check transmission oil level.
●
Check axle oil level.
●
Engine oil level checking procedure
●
Check the area under the forklift truck for
leaking consumables.
CAUTION
DO NOT use the truck, but call the technical service
department, if you notice any malfunctions or if you
have any doubts about its correct operation.
Use and operation
4
Remaining ready for operation
4160068011601 EN - 09/2020
To Next Page
Loading...
Need help?
General
