– Remove the oil cap(1) to ventilate the
crankcase. This is beneficial for bleeding
the oil.
– Place an oil pan under the engine to collect
the used oil.
– Remove the oil drain plug(2) and allow the
oil to flow into the collection container.
When the oil has been drained completely,
replace the oil drainage plug
Component Tightening torque
Drain plug 3 kgf.m
– Dispose of the used oil properly.
Filling up with engine oil
– Ensure that the engine is in a horizontal po-
sition.
Maintenance
5
Maintenance service
11960068011601 EN - 09/2020
To Next Page
Loading...
