– Open the buckle(3) and remove the air filter
head cover(4).
– Pull out the air filter(1).
– Remove dust from the filter by blowing out-
ward through the filter using compressed air
(2). Remove dust using minimum air pres-
sure in order to avoiding damaging the in-
sert.
CAUTION
Flying object hazard!
Wear eye protection when carrying out maintenance
on the engine and using compressed air or pressur-
ised water jets, in order to prevent dust, flying debris,
compressed air or pressurised water or gas from
damaging your eyes.
Failure to follow this instruction may result in injury.
– Clean the air filter element.
– If the filter insert is damaged, heavily soiled
or oily, replace it with a new insert.
CAUTION
The air filter insert requires more frequent cleaning
when the engine is running in dusty environments.
Maintenance
5
Maintenance service
12560068011601 EN - 09/2020
To Next Page
Loading...
