WARNING
On some equipment variants, the
amount of head clearance on the truck
may be restricted.
On these specific equipment variants,
the distance between the head and the
lower edge of the roofing sheet must be
at least 40 mm.
NOTE
If there are separate operating instructions for
the seat, they must be followed.
WARNING
To obtain optimum seat cushioning, you must adjust
the seat suspension to your own body weight. This is
better for your back and protects your health.
– To prevent injury, make sure that there are no ob-
jects within the swivel area of the seat
Moving the driver's seat
– Lift and hold the lever (1)
– Push the driver's seat into the desired posi-
tion.
– Release the lever.
– Ensure that the driver's seat is securely en-
gaged.
7094_003-006
1
Operation
4
Checks and tasks before daily use
7357348011850 EN - 08/2020 - 12
To Next Page
Loading...
