Adjusting the seat backrest
Do not put pressure on the seat backrest while
engaging it.
– Lift and hold the lever (2)
– Push the seat backrest into the desired po-
sition.
– Release the lever.
– Ensure that the seat backrest is securely
engaged.
NOTE
The backwards tilt angle of the seat backrest
can be restricted by the structural condition of
the truck.
Adjusting the seat suspension
NOTE
The driver's seat can be adjusted to suit the
weight of the individual driver. In order to ach-
ieve the best seat suspension setting, the driv-
er should perform the adjustment whilst sitting
in the seat.
NOTE
The driver's seat MSG 65/MSG 75 is designed
for people weighing between 45 kg and
170 kg.
NOTE
The MSG 75 seat is equipped with electric air
suspension that is activated using an electric
switch instead of the lever (3).
– Fully extend the weight-adjusting lever (3)
– Pump it up or down to set the driver's
weight.
– Return the weight adjusting lever to the
central initial position before each new lift
(audible click).
– Fully fold in the weight adjusting lever once
adjustment is complete.
7094_003-008
2
6321_003-038
3
4
Operation
4
Checks and tasks before daily use
74 57348011850 EN - 08/2020 - 12
To Next Page
Loading...
