Stratasys Objet350 - Page 203

Objet350 User Guide 6 Operating and Maintaining the Objet350 3DPrinter
DOC-17001 Rev.G 6-72
4. SelecttheUVlamp(s)tobereplacedandclickNext.
Figure6-109UVlampselectionscreen
5. DisconnecttheUV-lamppowerconnectorandtheUVheatfuse
connector.
Figure6-110DisconnectingtheUVlamp
Note:Donotdisconnectthepowerconnectiontothecoolingfans.