1
1 Introduction
uPrint
®
and uPrint
®
Plus are designed with ultimate simplicity in mind. The printer enables you to
build parts quickly and easily, even if you’ve never used a 3D printer before.
The printers build models with ABSplus
TM
material so parts are strong and durable. ABSplus material
also ensures you will be able to drill, tap, sand and paint your creations. With Soluble Support
Technology (SST), your completed parts are quickly available for review and test. uPrint and uPrint
Plus are an innovative combination of proprietary hardware, software and material technology.
Welcome to the new dimension of 3D modeling!
How to use this guide
This User Guide is laid out in easy to follow sections which cover Set-up, Operation, Maintenance,
and Troubleshooting. Read each section carefully so that you will get the best performance from
your printer.
Throughout this User Guide, text representing Interface Messages that appear on the display panel
are presented in a bold font.
Learn More!
An electronic User Guide is available on the startup CD. This guide provides information on the
following topics:
• Troubleshooting information
• Important safety notices and regulatory information
• Information about supported printing supplies
• Detailed user instructions
You can also find more information at:
http://www.dimensionprinting.com/uprint/customerinfo.html
To Next Page
Loading...
