Stratasys uPrint - Declaration of Conformity

65
Declaration of Conformity
Stratasys, Inc. 7665 Commerce Way, Eden Prairie, MN 55344-2080 U.S.A.
Main: 952.937.3000 Fax: 952.906.0070
www.stratasys.com
108480-0002
Declaration of Conformity
Manufacturer
Stratasys Inc.
7665 Commerce Way
Eden Prairie, MN 55344-2080
EU Representative
Tim B. Heller
Type of Equipment:
3D Printer
Model Numbers:
180-00108, uPrint 3D Printer
180-00109, uPrint 3D Printer
180-00110, uPrint 3D Printer
180-50001, uPrint Plus 3D Printer
We declare under our sole responsibility that the devices mentioned above comply with the
following EU Directives:
Electromagnetic Compatibility
(EMC)
Low Voltage
89/336/EEC
2006/95/EC
Common Technical
Specifications used for
demonstration of compliance:
EN55022:1998 EN 6100-3-2: 2003
EN55024:1998 EN 6100-3-3: 1995
EN60950-1: 2006
Date of Validity:
December 29, 2009
Design and Technical
Construction file maintained at:
Stratasys Inc.
7665 Commerce Way
Eden Prairie, MN 5534-20804
Stratasys GmbH
Weismüllerstr. 27
60314 Frankfurt am Main
Germany
Tel +49 69 420 9943 0
Name of Authorized Signatory:
Position Held in Company:
S.Scott Crump
Chief Executive Officer
Tim B. Heller
Managing Director, Europe
Signatures: