Stratasys uPrint - 9 Printer Specifications; Physical Specifications; Facility Specifications

61
9 Printer Specifications
The information in this section is applicable to both uPrint and uPrint Plus printers.
Physical specifications
Facility specifications
Height 762 mm (30 in)
Width 660 mm (26 in)
Depth 660 mm (26 in)
Weight 59 kg (130 lbs)
Material bay height 153 mm (6 in)
Material bay width 660 mm (26 in)
Material bay depth 660 mm (26 in)
Material bay weight 17 kg (17 lbs)
Installation location Stable flat surface capable of holding 100 kg (220 lbs), with a height clearance of
90 - 100 cm (36 - 40 in).
Note - if using additional material bay:
Stable flat surface capable of holding 120 kg (260 lbs), with a height clearnace of
117 - 127 cm (46 - 50 in).
Power Requirements 100–240VAC ~ 12 - 7A 50/60Hz 1200W dedicated circuit within 2 m (80 in.)
Do not use an extension cord or a power strip, using these can possibly
cause intermittent power issues.)
Air Circulation 115 mm (4.5 in) minimum space behind printer for air circulation.
153 mm (6 in) minimum space around printer for air circulation.
Network Connection Ethernet 10/100 Base T within 4m (14 ft).