6.2.6 Starting and stopping the machine
Starting the machine
WARNING
Do not use the machine with defective safety devices.
Contact Struers Service.
CAUTION
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
CAUTION
Keep clear of rotating parts during operation.
Note
We recommend that an exhaust system is applied when alcohol-based suspension
or lubricants are used.
1. Set the speed control to the desired disc speed.
2. Press the Start button. The machine starts operating.
3. If needed, adjust the disc speed.
Stopping the machine
• Press the Stop button.
Emergency stop
Note
Activating the emergency stop on the machine will stop all movable parts.
Note
Do not use the emergency stop for operational stop of the machine during normal
operation.
1. Press the emergency stop button to activate an emergency stop.
28 LaboPol-60
6 LaboUI
To Next Page