LaboDoser-10 mounted on a LaboDoser-10 table stand
10.1 Unpacking
Note
Struers recommends that all original packaging and fittings are kept for future use.
1. Cut the packing tape on the top of the box.
2. Remove the loose parts.
3. Remove the unit from the box.
10.2 Checking the packing list
The packing box contains the following items:
Pcs. Description
1 LaboDoser-10 unit with1 liter bottle
1 Allen key 3 mm
1 Bracket for doser arm
2 Hexagonal socket screws
1 Instruction Manual set
10.3 Installation
Hint
If lubricant or suspension is not to be used for a prolonged period of time, remove the
bottle from the bottle holder and store it upright.
LaboDoser-10 can be mounted on the column of the following units:
• LaboUI
• LaboForce-50
• LaboForce-Mi
74 LaboPol-60
10 LaboDoser-10
To Next Page