The Esc button
Use this button on the control panel to return to previous functions or values.
• Press the button to return to the main menu.
• Press the button to return to the last function or value.
• Press the button to cancel changes.
8.2.8 Changing settings and text
Changing text
To change a text value, select the field for entering the text.
1. Press the Turn/push knob knob to activate the text
editor.
2. If needed, use the Upper case/Lower case arrow at the
bottom of the screen to switch between upper case and
lower case letters.
3. Enter the desired text.
4. Navigate to select Save & Exit.
5. Press the Turn/push knob knob to exit the screen.
Changing settings
To change a setting, select the field for changing the setting.
1. Turn the Turn/push knob knob to go to the field where
you wish to change the setting.
2. Press the Turn/push knob knob to enter the field.
– More than two options:
Turn the Turn/push knob knob to scroll up or down
in a list of values.
– Two options:
Press the Turn/push knob knob to toggle between
the options.
3. Navigate to select Save & Exit.
4. Press the Turn/push knob knob to exit the screen.
8.2.9 Software settings
Start-up - the first time
See Navigating in the display ►52for instructions on how to navigate in the display.
8 LaboForce-100
LaboPol-60 53
To Next Page