Struers LaboPol-60 - Removing the Specimens; Changing the Specimen Mover Plate

Stopping the machine
• Press the Stop button.
Emergency stop
Note
Activating the emergency stop on the machine will stop all movable parts.
Note
Do not use the emergency stop for operational stop of the machine during normal
operation.
1. Press the emergency stop button to activate an emergency stop.
WARNING
Before you release the emergency stop, investigate the reason for activating the
emergency stop and take any necessary corrective action.
2. Turn the emergency stop button to release the emergency stop.
9.2.10 Removing the specimens
1. To release the specimens, press the quick-release button.
2. When you have removed the specimens, lower the pressure feet back into position.
9.2.11 Changing the specimen mover plate
If you wish to prepare specimens of another diameter, use a different specimen mover plate. The
specimens must fit the holes in the specimen mover plate.
72 LaboPol-60
9 LaboForce-Mi