CAUTION
For manual preparation use the switch on the side of
the specimen mover head to disable rotation of
LaboForce-Mi.
CAUTION
Wear suitable gloves to protect fingers from abrasives
and warm/sharp specimens.
CAUTION
When you perform manual grinding or polishing, be
careful not to touch the disc.
CAUTION
Do not try to collect a specimen from the tray while the
disc is rotating.
CAUTION
When the disc is rotating, make sure your hands are
kept completely clear of its periphery and out of the
splash bowl.
9.2.9 Starting and stopping the machine
Starting the machine
WARNING
Do not use the machine with defective safety devices.
Contact Struers Service.
CAUTION
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
CAUTION
Keep clear of rotating parts during operation.
Note
We recommend that an exhaust system is applied when alcohol-based
suspension or lubricants are used.
1. Set the speed control to the desired disc speed.
2. Press the Start button. The machine starts operating.
3. If needed, adjust the disc speed.
9 LaboForce-Mi
LaboPol-60 71
To Next Page