8.1 Installation
8.1.1 Unpacking
Note
Struers recommends that all original packaging and fittings are kept for future use.
1. Cut the packing tape on the top of the box.
2. Remove the loose parts.
3. Remove the unit from the box.
8.1.2 Checking the packing list
Optional accessories may be included in the packing box.
The packing box contains the following items:
Pcs. Description
1 LaboForce-100
1 Connection piece. Diameter: 6 to 1/8"
1 Allen key with cross handle, 4x150
1 Spacing disc
1 Instruction Manual set
8.1.3 Installation - LaboForce-100
Note
This device must be mounted securely on the machine.
Note
Do not use the Turn/push knob knob to move LaboForce-100.
40 LaboPol-60
8 LaboForce-100
To Next Page