STYLE 350 - STYLE 510 - 11 kW - (ø102 spindle bore); Noise level; Machine lights

Machine manual STYLE 350 – 510 V4.9
16
3.4.5 STYLE 510 - 11 kW - (ø102 spindle bore)
3.5 Noise level
The STYLE 350 – 510 lathes will produce a maximum noise level of 80dB (A). This has been measured according
the guideline 98/37/EG chapter 1.7.4.2.u.
3.6 Machine lights
The machine has equal lights in the operating area of the machine and a flexible spot is placed on the back side
of the cross slide.
When the machine will be switch on by the main switch, the fluorescent tubes will be powered on automatically.
The flexible spot light can be switched ON/OFF by the switch integrated in the handle.
Avoid hearing impairment by using OSHA approved hearing protectors during
operating the machine.
It’s highly recommended to use the flexible spotlight during operating the machine
to avoid stroboscopic effect.