Machine manual STYLE 350 – 510 V4.9
1 Preface
This manual is a translation of the original and contains information needed for working with the STYLE CNC flatbed
lathe in a safe and responsible manner. For service and repairs on the machine, always follow instructions and
guidelines as described in this manual. Before operating the machine this manual has to be read completely, as
well as the software manuals 'STYLE Lathe' and 'CNC-Edit'. When questions arise, always contact your dealer.
1.1 User manual
This manual is created along the Dutch guideline NEN 5509. This guideline prescribes the setup of manuals for
use in Holland. In this manual various icons and characters are used to explain or add valuable information to a
function. This information is provided by the images shown here.
“ATTENTION”, operator at risk of injury
“ATTENTION”, possible risk of damaging the machine
1.2 Documents applying to machine
For correct use and troubleshooting the following documents are available:
• Software manual Lathe
Manual applying to the software already installed on your machine
• Software manual CNC Edit
Manual applying to the software already installed on your machine
• Preparation document
Technical information for preparing the workplace of your machine before instalment.
• Electrical schemes
For every product range of the STYLE machines an electrical scheme is available
• Parts list
Overview of items and parts installed on your machine
Next to all the standard documentation there are more specific appendixes available. These appendixes contain
information about add-ons or specific models of machine and extra build on functions. Please note that in the
standard documentation, there is no explanation for special models or features, although there can be referred to
the appendixes.
If you did not receive the complete package of manuals at the delivery of your machine, please contact your
dealer or the customer support of STYLE CNC Machines
“TIP”, how to work more efficiently
“ADVICE”, prevention of dangerous situation
To Next Page
Loading...