STYLE 350 - EC declaration of conformity of the machinery

Machine manual STYLE 350 – 510 V4.9
5
1.3 EC declaration of conformity of the machinery
Manufacture: STYLE CNC Machines B.V.
Address: Het Steenland 15, 3751 LA Bunschoten, Nederland
Hereby declares that the next machine meets the below guidelines, standards, rules
and regulations, which apply to the requirements in the standard MCE:
Machine: Lathe
Certificates, specifications, rules and regulations as applicable:
2006/42/EG
Machine guideline
2014/35/EU
Low voltage directive
93/68/EEG
Changes CE-marking guidelines
2014/30/EU
Guidelines in case Electromagnetic Compatibility EMC
Harmonized standards and regulations:
NEN-ISO 1708:1997
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy
NEN-EN-ISO 7010:2012
Graphical symbols - Safety colors and safety signs - Registered safety signs
NEN-EN-ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction
NEN-EN-ISO 23125:2015
(Cor. 2016-05) en
Machine tools - Safety - Turning machines
NEN-EN-IEC 60204-1:2006
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
NEN-EN-IEC 60947-5-1:2018
en
Low-voltage switchgear and control gear - Part 5-1: Control circuit devices and switching
elements - Electromechanical control circuit devices
NEN-EN-IEC 61131-2:2007
Programmable controllers - Part 2: Equipment requirements and tests
Bunschoten, January 2020
B. Clement
Managing director