5.7.1 Range of the U-steady rest
The range of the U-steady rest is 10-160mm and 150-300mm. To adjust the range, follow underneath steps:
1. Remove the bolts from both sides (9pcs.)
2. Move the block with the mandrel to the requested position.
3. Install the bolts, and tighten these.
5.8 RPM potentiometer
During automatic operating the RPM potentiometer can be used to optimize the RPM specifically for the tools and
product. By rotating the potentiometer clockwise or counter clockwise the RPM can be adjusted max. 20%. This
can be accelerating or decelerating.
To Next Page
Loading...