Contents v
4.2 Installation Precautions 4–2
4.2.1 ESD Precautions 4–2
4.2.2 Preinstallation Instructions 4–2
4.2.3 Postinstallation Instructions 4–3
4.3 Powering Off the Server and Removing the Cover 4–3
4.4 Locations of Server Components 4–5
4.5 Customer-Replaceable-Unit Replacement Procedures 4–6
4.5.1 I/O Board 4–7
4.5.1.1 Removing an I/O Board 4–7
4.5.1.2 Installing an I/O Board 4–8
4.5.2 SMDC Service Processor 4–9
4.5.2.1 Removing the SMDC 4–9
4.5.2.2 Installing the SMDC Card 4–10
Flashing the BIOS 4–11
4.5.3 PCIe Card 4–12
4.5.3.1 Removing the PCIe Card and Riser 4–12
4.5.3.2 Installing the PCIe Card and Riser 4–14
4.5.4 SATA Hard Disk Drive and Carrier 4–15
4.5.4.1 Removing an HDD and Carrier 4–16
4.5.4.2 Installing an HDD and Carrier 4–17
4.5.5 SATA Backplane 4–18
4.5.5.1 Removing the SATA Backplane 4–18
4.5.5.2 Installing the SATA Backplane 4–20
4.5.6 DVD Drive Assembly 4–22
4.5.6.1 Removing the DVD Drive Assembly 4–22
4.5.6.2 Installing the DVD Drive Assembly 4–23
4.5.7 Power Supply 4–25
4.5.7.1 Removing a Power Supply 4–25
To Next Page
Loading...
