To Next Page

To Previous Page

Contents vii

C. Using the Optional Service Processor C–1

C.1 Service Processor Overview C–1

C.2 Util. exe Utility C–2

C.2.1 Using the util.exe Command Line Options C–3

C.2.2 Using the util.exe GUI C–4

C.2.2.1 Flash Firmware C–4

C.2.2.2 Lan Config C–4

C.2.2.3 Setting User Names and Passwords C–5

C.2.2.4 Setting PEF C–5

C.3 Setting up the SMDC for IPMItool v1.8.5 C–6

C.3.1 Setting Up the SMDC Using IPMItool C–6

C.3.2 Setting Up the System BIOS C–7

C.3.3 Setting Up on Solaris C–8

C.3.4 Setting Up on Linux C–9

C.3.5 Setting Up the Console System C–10

D. Booting the Supplemental CD from a PXE Server D–1

D.1 Setting up the Supplemental CD Image on the PXE Server D–2

D.2 Accessing the Supplemental CD From the Target Sun Fire X2100 Server

D–4

D.3 Flashing System BIOS from a PXE Server D–4

D.3.1 Installing the pxe_flash Image on the PXE Server D–5

D.3.2 Flashing the BIOS using the PXE Server Image D–7

D.3.3 Removing the PXE Flash Configuration File(s) D–7

Index Index–1

Sun Microsystems Sun Fire X2100 User Manual

Other manuals for Sun Microsystems Sun Fire X2100