Chapter 1 Preparing to Install the Sun Fire X4170, X4270, and X4275 Servers 13
Server Specifications
Physical Specifications
TABLE 1-3 lists the physical specifications of the Sun Fire X4170, X4270, and X4275
Servers.
Ethernet ports Four Gigabit Ethernet (GbE) ports on rear panel
Each Network Interface Card (NIC) supports I/O Acceleration Technology 3 (IOAT3)
Service processor Uses the SP subsystem
Includes the Baseboard Management Controller (BMC), which supports the industry-
standard IPMI feature set
Supports remote KVMS over IP
Includes a serial port
Supports Ethernet access to SP through a dedicated 10/100BaseT management port and
optionally through one of the host GbE ports (sideband management)
Power supplies Up to two hot-pluggable power supplies
Cooling fans Redundant hot-pluggable fans
Management
software
Supports Sun Integrated Lights Out Manager 2.0 and 3.0
TABLE 1-3 Servers Physical Specifications
Parameter Sun Fire X4170 Server Sun Fire X4270 Server Sun Fire X4275 Ser ver
Height 1.71 inches/43.43 mm 3.34 inches/84.84 mm 3.45 inches/87.6 mm
Width 16.75 inches/425.45 mm 16.75 inches/425.45 mm 17.2 inches/436.8 mm
Depth 28.0 inches/711.25 mm 28.0 inches/711.25 mm 30.13 inches/765.25 mm
Weight 36 lbs/16.36 kg 49 lbs/22.27 kg 65 lbs/29.54 kg
TABLE 1-2 Sun Fire X4270 and X4275 Servers Components and Capabilities (Continued)
Component X4270 and X4275 Servers
To Next Page
Loading...
