Sun Microsystems Sun Fire X4170 - Changing the ILOM SP IP Address

Chapter 4 Setting Up the Server 81
7. To display the current SP IP address, type:
-> show /SP/network
The IP information appears, as shown in the following sample:
/SP/network
Targets:
commitpending = (Cannot show property)
ipaddress = 129.148.53.128
ipdiscovery = static
ipgateway = 129.148.53.248
ipnetmask = 255.255.255.0
macaddress = 00:1E:68:0F:4A:84
managementport = /SYS/SP/NET0
outofbandmacaddress = 00:14:4F:E7:2E:48
pendingipaddress = 129.148.53.128
pendingipdiscovery = static
pendingipgateway = 129.148.53.248
pendingipnetmask = 255.255.255.0
pendingmanagementport = /SYS/SP/NET0
sidebandmacaddress = 00:14:4F:E7:2E:49
8. Record the IP address as you will need it to log in to ILOM using SSH or an
internet browser.
Changing the ILOM SP IP Address
You can use any of the following methods to change the current IP address of the
ILOM SP:
■ “Use the BIOS Setup Utility to Change the ILOM SP IP Address” on page 82
■ “Use the Serial Connection to Change the ILOM SP IP Address” on page 82
■ “Use a Web Browser to Change the ILOM SP IP Address” on page 83