52 Sun Fire X4170, X4270, and X4275 Servers Installation Guide • December 2009
Server Installation Process Overview
To install your server into a four-post rack using the slide-rail and cable
management arm options, perform the following tasks in the order listed.
1. “Checking Rack Compatibility” on page 53
2. “Disassembling Slide-Rails” on page 54
3. “Installing the Mounting Brackets Onto the Server” on page 56
4. “Installing the Cable Management Arm” on page 65
5. “Verifying Operation of the Slide-Rails and CMA” on page 72
6. “Connecting the Cables” on page 74
Rail Assemblies
The server might include either tool-less or bolt-on rail assemblies in rackmount kits.
Instructions for both types are included in this chapter.
Service Label
Refer to the service label on the server top cover for instructions on how to install
your server into a four-post rack, using the slide-rail and cable management arm
options. The service label includes instructions for both tool-less and bolt-on rail
assemblies.
To Next Page
Loading...
