51
CHAPTER
3
Installing the Server Into a Rack
With Slide-Rails
This chapter describes how to place the server into a rack using the rail assembly in
the rackmount kit. Perform this procedure if the rail assembly is purchased.
This chapter includes the following topics:
■ “Before You Begin” on page 51
■ “Checking Rack Compatibility” on page 53
■ “Disassembling Slide-Rails” on page 54
■ “Installing the Mounting Brackets Onto the Server” on page 56
■ “Attaching the Slide-Rail Assemblies to the Rack” on page 58
■ “Installing the Server Into the Slide-Rail Assemblies” on page 61
■ “Installing the Cable Management Arm” on page 65
■ “Verifying Operation of the Slide-Rails and CMA” on page 72
Note – In this guide, the term rack means either an open rack or a closed cabinet.
Before You Begin
Read the following overview and see the service label on the top cover before you
begin to install the server into a rack.
To Next Page
Loading...
