vi Sun Fire X4170, X4270, and X4275 Servers Installation Guide • December 2009
▼ Verify Operation of Slide-Rails and CMA 72
4. Setting Up the Server 73
Connecting the Cables 74
Connector Locations 74
▼ Cable the Server 75
Connecting to the ILOM Service Processor for the First Time 78
About ILOM SP IP Addresses 78
About ILOM SP Interfaces 78
Determining the ILOM SP IP Address 79
▼ Use the BIOS Setup Utility to View the Assigned ILOM SP IP
Address 79
▼ Use a Serial Connection to View the Assigned ILOM SP IP Address
80
Changing the ILOM SP IP Address 81
▼ Use the BIOS Setup Utility to Change the ILOM SP IP Address 82
▼ Use the Serial Connection to Change the ILOM SP IP Address 82
Example 1 82
Example 2 83
▼ Use a Web Browser to Change the ILOM SP IP Address 83
Applying Main Power to the Server for the First Time 84
▼ Apply Main Power to the Server 84
5. Configuring the Preinstalled
Solaris 10 Operating System 87
Before You Begin 88
Installation Worksheet 88
Configuring the Preinstalled Solaris 10 Operating System 92
▼ Configure the Preinstalled Solaris 10 OS 92
▼ Redirect the Console Output to the Video Port (Optional) 94
To Next Page
Loading...
