36
The base covers of the PCS had been removed and packed into the cabinet be-
fore packaging.
• Lifting and transportation
*The figure above is indicative only.
The PCS can be lifted and transported by crane. Remove all wooden sealing boards
around the cabinet before hoisting.
Prepare four slings to connect the cabinet bottom and the lifting points on the lifting
beam. Tilting during the transportation is strictly prohibited!
The protective materials around the cabinet shall be kept intact to prevent slings from
scratching the PCS during the hoisting.
In the process of lifting, landing and moving the PCS by a crane, ensure the movement is
slow and smooth. Also only place the PCS on a firm and stable ground.
In the whole process of moving the PCS by a crane, the safety operation regulations of
the crane must be strictly observed. In case of bad weather conditions, such as heavy
rain, fog, wind, etc., the lifting work should be stopped.
5 Mechanical Mounting User Manual
To Next Page
Loading...
Need help?
General
