Suzuki DR650SE - Brake Disc

5-5 CHASSIS
BRAKE DISC
• Make sure that the brake disc is clean and free of any
greasy matter_ Apply THREAD LOCK SUPER 1/13601/ to
the disc mounting bolts and tighten them to the speci-
fied torque.
~ 99000-32130: THREAD LOCK SUPER 1/1360"
~ Disc bolt: 23 N-m (2.3 kg-m, 16.5 Ib-ft)
• Align the drive lugs CD to the recesses @ of the wheel hub.
• Before tightening the front axle, position the stopper @
of speedometer gearbox against stopper @.
• Tighten the front axle to the specified torque and then
move the front fork up and down.
• Tighten the axle holder nuts to the specified torque.
NOTE:
When tightening the axle holder nuts, first tighten the up-
per nuts.
~ Front axle: 65 N·m (6.5 kg-m, 47.0 Ib-ftl
Axle holder nut: 10 N·m (1.0 kg-m, 7.0 Ib-ft)