Suzuki DR650SE - Engine Reassembly; Oil Seals

ENGINE REASSEMBLY
The engine is reassembled by carrying out the steps of dis-
assembly in the reverse order, but there are a number of
steps that demand special descriptions or precautionary
measures.
NOTE:
Apply engine oil to each running and sliding part before reas-
sembling.
OIL SEALS
• Fit the respective oil seals to the crankcase, clutch cover
and gearshift cover.
• Apply SUZUKI SUPER GREASE If A" to the lip of oil seals.
~99000-32030: SUZUKI SUPER GREASE "A"
! ACAUTION!
Replace the oil seals with new ones every disassem-
bly to prevent oil leakage.
ENGINE 3·42