Suzuki DR650SE - Reassembly and Remounting

5·17 CHASSIS
DAMPER ROD RING
Inspect the damper rod ring for wear or damage.
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse order
of removal and disassembly, and also carry out the follow-
ing steps:
INNER TUBE METAL
• Install the metal by hand as shown in the illustration.
[ACAUTION[
Use special care to prevent damage to the "Teflon"
coated surface of the Anti-friction metal when mount-
ing it.
OUTER TUBE METAL, OIL SEAL AND DUST SEAL
• Clean the metal groove of outer tube and metal outer
surface.
• Apply grease to the lip of new oil seal @.
~ 99000-25030: SUZUKI SUPER GREASE" A"
• Install the outer tube metal G), oil seal retainer @, oil seal
@ and dust seal @ .
• Q, 09940-52860: Front fork oil seal installer
[ A CAUTION [
Use special care to prevent damage to the "Teflon"
coated surface of the Anti-friction metal when mount-
ing it.
• Install the dust seal stopper ring ®.
[ A CAUTION [
Make sure that the oil seal stopper ring fitted securely.
®
~.I-®
®
@
CD