Suzuki DR650SE - Rear Sprocket

• Remove the sprocket drum bearing with the special tool.
.M'Oli 09913-75830: Bearing remover
IA CAUTION I
The removed bearing should be replaced with a new
one.
REAR AXLE
Using a dial gauge, check the rear axle for runout.
If the runout exceeds the limit, replace the rear axle.
I!ib 09900-20606: Dial gauge (1/100 mm)
09900-20701: Magnetic stand
09900-21304: "V" block set
Service Limit:
0.25 mm (0.010 in)
REAR SPROCKET
Inspect the sprocket teeth for wear. If they are worn as il-
lustrated, replace the sprocket and drive chain.
REAR SPROCKET DAMPER
Inspect the dampers for wear and damage. If any defects
are found, replace the dampers as a set.
CHASSIS 5·30
Normal wear Excessive wear