Suzuki DR650SE - Page 259

DR650SEK1 (’01-MODEL) 10-6
CARBURETOR
ITEM
SPECIFICATION
E-03, 28 E-33 E-18
Carburetor type MIKUNI
BST40SS
←←
Bore size 40 mm ←←
I.D. No. 32E1 32E6 32E2
Idle r/min. 1 500 ± 100 r/min. 1 500 ± 50 r/min.
Float height 14.7 ± 1.0 mm
(0.58 ± 0.04in)
←←
Main jet (M.J.) #
← #137.5
Jet needle (J.N.) 6F23 ← 6H21-4th
Needle jet (N.J.)
←
Throttle valve (Th.V.) #95 ←←
Pilot jet (P.J.) #
←←
Starter jet (G.S.) #40 ←←
Pilot screw (P.S.)
PRE-SET
PRE-SET ←
(1.0 turn back)
Throttle cable play 0.5 – 1.0 mm
(pulling cable) (0.02 – 0.04 in)
←←
Starter cable play 0.5 – 1.0 mm
(0.02 – 0.04 in)
←←
CARBURETOR
ITEM
SPECIFICATION
E-04, 34, 54 E-17, 22, 24 U-type E-22
Carburetor type MIKUNI BST40SS ←←
Bore size 40 mm ←←
I.D. No. 32E0 32E3 32E4
Idle r/min. 1 500 ± 100 r/min. ←←
Float height 14.7 ± 1.0 mm
(0.58 ± 0.04 in)
←←
Main jet (M.J.) #140 ←←
Jet needle (J.N.) 6F19-3rd ←←
Needle jet (N.J.) Y-5 ←←
Throttle valve (Th.V.) #95 ←←
Pilot jet (P.J.) #42.5 ←←
Starter jet (G.S.) #40 ←←
Pilot screw (P.S.) PRE-SET PRE-SET PRE-SET
(1½ turns back) (1.0 turn back) (1
1
/
8
turns back)
Throttle cable play 0.5 – 1.0 mm
(pulling cable) (0.02 – 0.04 in)
←←
Starter cable play 0.5 – 1.0 mm
(0.02 – 0.04 in)
←←