Suzuki RMX450Z Service Manual

Drive Chain / Drive Train / Drive Shaft: 3A-3
Drive Chain Roller Construction
BA02J23106002
Engine Sprocket Removal and Installation
BA02J23106003
Removal
1) Support the motorcycle with a jack or wooden block.
CAUTION
!
Make sure that the motorcycle is supported
securely.
2) Loosen the rear axle nut (1).
3) Loosen the chain adjusters (2) to provide additional
chain slack.
4) Remove the engine sprocket cover (3) and front
chain guide plate (4).
1. Chain roller (upper) 4. Washer
2. Frame : 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
3. Chain roller (lower)
1
2
3
2
4
(a)
(a)
4
IA02J1310017-01
1
2
IA02J1310001-01
3
4
IA02J1310002-01

Suzuki RMX450Z Specifications

General

Displacement	449cc
Compression Ratio	12.5:1
Fuel System	Fuel injection
Starter	Electric
Transmission	5-speed constant mesh
Final Drive	Chain
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Engine Type	4-stroke, liquid-cooled, DOHC
Bore x Stroke	96.0 mm x 62.1 mm
Front Brakes	Single disc
Rear Brakes	Single disc
Front Tire	80/100-21
Fuel Tank Capacity	6.2 L (1.6 US gal)
Overall Length	2185 mm (86.0 in)
Ground Clearance	325mm
Seat Height	955mm
Wheelbase	1, 480mm