Suzuki RMX450Z - Front Wheel Assembly Construction; Front Wheel Assembly Removal and Installation

2D-3 Wheels and Tires:
Front Wheel Assembly Construction
BA02J22406002
Front Wheel Assembly Removal and Installation
BA02J22406003
Removal
1) Loosen two axle holder bolts (1) on the left front fork
leg.
2) Remove the front axle nut (2).
3) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. Make
sure that the motorcycle is supported
securely.
(a)
1
(b)
2
(c)
3
(b)
2
“a”
LH RH
IA02J1240042-01
1. Front axle nut “a”: Clearance : 11 N⋅m (1.1 kgf-m, 8.0 lbf-ft)
2. Front axle holder bolt : 35 N⋅m (3.5 kgf-m, 25.0 lbf-ft) : Apply grease.
3. Front brake disc bolt : 18 N⋅m (1.8 kgf-m, 13.0 lbf-ft) : Apply thread lock to the thread part.
1
2
IA02J1240029-01