Suzuki RMX450Z - Clutch Installation

Clutch: 5C-8
9) Remove the push rod (10).
NOTE
If it is difficult to pull out the push rod (10),
use a magnetic hand or a wire.
10) Flatten the clutch sleeve hub washer (11).
11) Hold the clutch sleeve hub (12) with the special
tools.
Special tool
(A): 09920–53740 (Clutch sleeve hub
holder)
(B): 09920–31020 (Extension handle)
12) Remove the nut, clutch sleeve hub washer (11) and
clutch sleeve hub (12).
13) Remove the thrust washer (13) and primary driven
gear assembly (14).
14) Remove the primary driven gear bearing (15) and
spacer (16).
Clutch Installation
BA02J25306010
1) Apply engine oil to the spacer (1) and primary driven
gear bearing (2).
2) Install the spacer (1) and bearing (2).
10
IA02J1530017-02
11
IA02J1530018-02
12
(A)
(B)
IA02J1530019-02
14
13
IA02J1530020-02
15
16
IA02J1530021-02
2
1
IA02J1530022-02