Suzuki RMX450Z Service Manual

Brake Control System and Diagnosis: 4A-15
Installation
Install the brake lever in the reverse order of removal.
Pay attention to the following points:
• Apply grease to the brake lever, pivot bolt and contact
point between piston and brake lever.
: Grease 99000–25100 (SUZUKI SILICONE
GREASE or equivalent)
• Tighten the brake lever pivot bolt (1) and lock-nut (2)
to the specified torque.
Tightening torque
Brake lever pivot bolt (a): 6 N·m (0.6 kgf-m, 4.5
lbf-ft)
Brake lever pivot bolt lock-nut (b): 6 N·m (0.6 kgf-
m, 4.5 lbf-ft)
Rear Brake Pedal Construction
BA02J24106017
(a)
1
IA02J1410034-02
(b)
2
IA02J1410035-01
FWD
FWD
2
2
3
1
(a)
IA02J1410036-03
1. Rear brake pedal : 29 N⋅m (2.9 kgf-m, 21.0 lbf-ft)
2. Dust seal : Apply grease.
3. Clip : Do not reuse.

Suzuki RMX450Z Specifications

General

Displacement	449cc
Compression Ratio	12.5:1
Fuel System	Fuel injection
Starter	Electric
Transmission	5-speed constant mesh
Final Drive	Chain
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Engine Type	4-stroke, liquid-cooled, DOHC
Bore x Stroke	96.0 mm x 62.1 mm
Front Brakes	Single disc
Rear Brakes	Single disc
Front Tire	80/100-21
Fuel Tank Capacity	6.2 L (1.6 US gal)
Overall Length	2185 mm (86.0 in)
Ground Clearance	325mm
Seat Height	955mm
Wheelbase	1, 480mm