Suzuki RMX450Z - Rear Shock Absorber Removal and Installation

Rear Suspension: 2C-5
Rear Shock Absorber Removal and Installation
BA02J22306005
Removal
1) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation” in Section 1G (Page 1G-5).
2) Remove the muffler. Refer to “Muffler / Exhaust Pipe
Removal and Installation” in Section 1K (Page 1K-2).
3) Remove the seat rail. Refer to “Seat Rail Removal
and Installation” in Section 9E (Page 9E-2).
4) Support the motorcycle with a jack to be no-load for
the rear shock absorber.
CAUTION
!
Make sure that the motorcycle is supported
securely.
5) Remove the rear shock absorber upper mounting
bolt and nut.
(c)
(c)
RightLeft
2
IA02J1230105-01
2. Swingarm pivot shaft : Apply grease.
: 70 N⋅m (7.0 kgf-m, 50.5 lbf-ft)
IA02J1230005-01