Chapter 7USB Interface
Introduction
This chapter provides information on setting up the scanner with a USB host. The scanner attaches directly to a USB host
computer.
If there are no peripherals included in the configuration and the host cable is less than 8.5’ long, the host can power the scanner
through the interface cable. If the configuration includes peripherals and/or the host cable is more than 8.5’ long, an external
power supply is necessary.
Throughout the programming bar code menus, asterisks (
*) indicate default values.
Connecting a USB Interface
The scanner connects with USB-capable hosts including:
• Desktop PCs and Notebooks
• Apple™ iMac, G4, iBooks (North America only)
• IBM SurePOS terminals
• Sun, IBM, and other network computers that support more than one keyboard.
The following operating systems support the scanner through USB:
• Windows 98, 2000, ME, XP
• MacOS 8.5 and above
• IBM 4690 OS.
Feature/Option
* Indicates Default
*North American, Standard USB Keyboard
To Next Page
Loading...
